Water-Based Pump & Motor Coating
Water-based coating suitable for pumps, motors, and electromechanical metal housings.
Smooth Finish
Good Adhesion
Fast Drying
Durable Protection
- Decorative and protective coating for pump and motor surfaces
- Convenient application, high construction efficiency
- Stable and uniform finish with good appearance retention
- Water-based, low odor and more environmentally friendly
Product Overview
Water-Based Pump & Motor Coating
The Water-Based Pump & Motor Coating (Model: SD-PMC200) is a high-performance water-based coating designed for pumps, motors, and electromechanical metal housings. It provides both decorative and protective performance, delivering a smooth and uniform finish, convenient application, stable coating quality, and good appearance retention for long-term use.
Key Features
- Excellent decorative and protective performance
- Smooth and uniform finish with high gloss and fullness
- Good adhesion to metal substrates
- Convenient application (spray, brush, or roller)
- Stable coating with good appearance retention
- Water-based, low odor and environmentally friendly
Applications
Typical Applications
Motors
Metal Housings
Equipment Components
Technical Data
| Composition | Water-based acrylic resin, functional additives, water |
|---|---|
| Model | SD-PMC200 |
| Brand | SISDIN |
| Packaging | 20 kg/pail |
| Colors | Blue, grey, green, custom colors |
| Coverage | 6 – 8 m²/kg |
| Drying Time (25°C) | Surface dry: ≤ 30 min; hard dry: ≤ 8 h |
| Shelf Life | 12 months |
| Storage | Store in a cool, dry and well-ventilated place, keep the container tightly sealed, avoid freezing and direct sunlight. |
Application Guide
-
1
Surface Preparation
Remove oil, dust, rust and loose coatings; the substrate should be clean and dry.
-
2
Stir
Stir thoroughly before use to ensure uniformity.
-
3
Dilution
Dilute with clean water if needed, usually 5 – 10%, depending on the application method.
-
4
Application
Apply by spray, brush, or roller; recommend 1 – 2 coats.
-
5
Drying
Surface dry in about 30 minutes, hard dry in about 8 hours (at 25°C, 50 – 70% RH).
-
6
Recoat
Recoat after the previous coat is fully dry, normally ≥ 2 hours (at 25°C).
Related Products
Machinery & Metal Parts Coating
View Product
Port Machinery Coating System
View Product
Water-Based Steel Structure Coating
View ProductLet's Work Together
Looking for the Right Coating Solution?
Tell us about your substrate, application environment and project requirements. Our team can review the information and discuss suitable options.